Do 3D models actually sell more? What the data says

Shopify’s numbers, brand stories and a peer-reviewed study, read with care. What we really know about 3D and “see it in your room”, and what it means for a small store.

If you’ve looked into 3D product views, you’ve seen the big numbers. Conversion “up to 250%” higher. A “94% lift”. They get repeated on a lot of websites, usually without a link.

We make a 3D app, so we have a reason to want those numbers to be true. That’s exactly why we went back to the original sources. Here’s what each one actually says, how much weight it can carry, and what we think it means for a small store.

What Shopify reports

The best-known figures come from Shopify itself.

  • “Up to 250%.” Shopify’s Shopify AR announcement says brands like Rebecca Minkoff and Bumbleride are “using 3D models to improve conversion rates by up to 250%”. Shopify’s 2020 post on 3D and video puts it this way: “3D models in AR have been shown to increase conversion rates by up to 250% on product pages.”
  • “94%.” In 2022, Shopify’s changelog said: “Merchants who add 3D content to their stores see a 94% conversion lift, on average.”

Neither post explains how the figure was measured. We couldn’t find a published method for either one: which stores, which products, over what period, compared with what.

That doesn’t make them wrong. Shopify can see a lot of stores. But it does change how to read them. “Up to 250%” is the best result, not a typical one. And “94% on average” is a number we can’t check.

What two brands found

The same 2020 Shopify post shares two brand stories with a little more detail.

Rebecca Minkoff, a handbag and fashion brand, “found that visitors who interacted with a 3D model were 44% more likely to add a product to their cart and 27% more likely to place an order than visitors who didn’t. And when visitors viewed a product in AR, they became 65% more likely to make a purchase.”

Bumbleride, which makes strollers, “saw a conversion rate increase of 33% for strollers and increased time on page of up to 21%” after adding 3D models to its store.

These are real results, reported by Shopify about its own feature. Notice what the Rebecca Minkoff numbers compare, though: shoppers who chose to spin the 3D model against shoppers who didn’t. People who take the time to turn a bag around are often already keen on it. So some of that difference is likely interest that was there before the 3D model, not interest the 3D model created. Shopify’s post doesn’t separate the two.

What independent research says

The most careful study we found isn’t from a platform or an app maker. It’s a peer-reviewed paper in the Journal of Marketing: “Augmented Reality in Retail and Its Impact on Sales” by Yong-Chin Tan, Sandeep R. Chandukala and Srinivas K. Reddy (2022). Among other things, they looked at how AR that lets shoppers see a product in their own space affects sales in online retail.

In the authors’ own summary, they found:

  • AR “has a positive impact on sales. The overall impact appears to be small, but certain products are more likely to benefit from the technology than others.”
  • The effect is “stronger for products and brands that are less popular”.
  • It is “greater for products that are more expensive”.
  • Customers “new to the online channel or product category are more likely to purchase after using AR”.

Their conclusion: AR “is most effective when product-related uncertainty is high”.

That’s a calmer picture than the headline numbers. Seeing a product in 3D helps. On average, the help is modest. And it helps most where shoppers have the most doubt.

Why the big numbers need a pinch of salt

Here’s a short checklist we use when we see any 3D sales figure, including on our own site.

  • Who measured it? A platform or app maker reporting on its own feature has every reason to share its best results. That isn’t dishonest, but it’s worth knowing.
  • Is it “up to” or “on average”? “Up to” is the top of the range. Your store could see much less.
  • Who is being compared? Shoppers who use a 3D viewer against shoppers who don’t is a comparison between two different groups of people. A before-and-after test on the same product is fairer.
  • How old is it? Most of these figures are from 2018 to 2022. Shoppers are more used to 3D now, which could cut either way.
  • Is there a link? If a number has no source, we leave it out.

What it means for a small store

Put together, the honest answer is: 3D can help shoppers feel sure about a product, and that can help sales. How much depends a lot on what you sell.

The research points to where it’s most likely to pay off, and that happens to describe a lot of small Shopify stores:

  • You’re not a household name. The study found the effect was stronger for less popular brands and products. A shopper who already knows a famous brand has fewer doubts. A shopper finding your store for the first time has more.
  • Your products raise questions. How big is it really? What does the back look like? What’s the texture like up close? 3D lets shoppers answer those themselves, and “see it in your room” shows the size on their own table or shelf.
  • Your products cost a bit more. The study found a bigger effect for pricier products, where a wrong guess costs the shopper more.

A good way to start is small. Pick a few products that get the most questions, or that you know people hesitate over. Add 3D to those. Then, in your Shopify analytics, compare how often those products are added to cart and bought for a few weeks before and after. Pick a stretch with no sale or big campaign running, so you’re comparing like with like. That’s your own number, and it’s worth more than any average.

The short version

  • Shopify reports conversion gains “up to 250%” and a “94%” average lift, but hasn’t published how either was measured.
  • Brand stories like Rebecca Minkoff’s are encouraging, but they compare keen shoppers with everyone else.
  • The best independent study we found says the effect is positive but small on average, and strongest for less-known brands, pricier products and products shoppers are unsure about.
  • Try it on the products where shoppers have the most questions, and measure the result on your own store.

If you’d like to try that without hiring anyone, our guide to adding 3D and AR to your Shopify store with just your phone walks through it step by step.

Sources

  1. Shopify, “Introducing Shopify AR: Augmented Reality Shopping for Your Store” (2018, with a later update)
  2. Shopify, “Shopify’s Built-In Support for 3D Models and Video” (March 2020, archived copy)
  3. Shopify Changelog, “Shop adds 3D and augmented reality (AR) previews” (May 2022)
  4. Yong-Chin Tan, Sandeep R. Chandukala and Srinivas K. Reddy, “Augmented Reality in Retail and Its Impact on Sales”, Journal of Marketing 86(1), 2022
  5. American Marketing Association, the authors’ summary of that study (April 2021)

Early access

Try Showpiece on your store.

Film a product with your phone, and shoppers can spin it in 3D and see it in their room. Leave your email and we’ll let you know when it’s ready to install.

By selecting “Join the waitlist”, you agree to receive Showpiece early-access and launch emails from Matrisia Lab Inc. You can unsubscribe at any time. Contact: hello@showpiece.dev; 1633 St Mary's Rd Unit 33F, Winnipeg, MB R2N 1Z3, Canada. See our Privacy Policy.

Open to Shopify stores worldwide; we’re starting with Canada and the US. We’ll only email you about Showpiece.